
Soot, smoke, and char removed by a licensed crew
Fire Damage Clean Up in SAN YSIDRO, California
Fire Damage Clean Up in SAN YSIDRO, California starts with a fast walk-through and a written scope. We pull soot off walls, neutralize smoke odor in the HVAC, and haul out charred framing before it corrodes the rest of the house. If you need fire cleanup services in SAN YSIDRO after a kitchen flare-up, attic fire, or electrical short, call (833) 929-6186 and we roll a crew the same day.
What's included
What Is Included in Fire Damage Clean Up
Our standard fire damage clean up in SAN YSIDRO, California covers the cleaning and stabilization work most claims need. Structural repair, contents packing, and reconstruction are quoted separately once the cleaning scope is documented. You see the split in writing before we start.
Emergency Board-Up and Tarping
We secure windows, doors, and damaged roof sections the same visit. This stops rain intrusion, prevents theft, and keeps the site safe for you and the adjuster.
Soot and Char Removal
HEPA vacuuming, dry ice blasting, and chemical sponge treatment on walls, ceilings, and framing. We protect clean rooms with negative air machines and charcoal activated filters.
Water Extraction and Drying
Suppression water gets extracted and the structure dried with Dri-Eaz air movers and dehumidifiers. We meter every room and document readings so mold growth after fire suppression water does not start.
HVAC and Duct Cleaning
Smoke odor lingering in walls and HVAC gets addressed at the source. We clean the air handler, ductwork, and returns, then run a hydroxyl generator until odor tests clear.
Odor Treatment and Sealing
Thermal fogging solution reaches cavities, followed by smoke sealant primer and odor-blocking paint on affected surfaces. This is what keeps the smell from returning in summer heat.
Insurance Documentation Package
Photos, moisture readings, thermal images, and a written scope, organized for your adjuster. We bill carriers directly when coverage applies and keep you copied on every report.
Service overview
What Fire Damage Clean Up in SAN YSIDRO, California Covers
Fire Damage Clean Up in SAN YSIDRO, California is the physical removal of soot, char, ash, and suppression water from a structure after a fire is out. It is not a wipe-down with a rag and a bucket. Our technicians use a thermal imaging camera to find hidden fire damage behind drywall, a moisture meter to map water from firefighting efforts, and HEPA vacuums on every porous surface before anything gets repainted. Soot is acidic and etches within 72 hours, so the clock matters.
Local calls come from everywhere: a kitchen fire in a Beyer Boulevard Corridor apartment, a garage fire near the San Ysidro Border District, or a bedroom fire in Ocean View Hills. Many of these homes are older stick-frame builds with original insulation and lumber that holds smoke odor for months. We offer 24/7 fire cleanup services in SAN YSIDRO so a fire at 2 a.m. does not sit until Monday. If you are searching for fire damage clean up near me in SAN YSIDRO California, the crew that answers is the crew that shows up.
The service timeline
How Our Fire Cleanup Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Board-Up
We secure broken windows, tarp damaged roof sections, and lock the structure within hours of your call. This stops rain intrusion and keeps the site safe. On a recent Palm Avenue Corridor job, board-up happened 90 minutes after the call and prevented a second water loss from a forecast storm.
Assessment and Scope
A technician walks the structure with a thermal imaging camera and moisture meter, room by room. We map soot travel, check the HVAC for smoke infiltration, and photograph everything for the insurance file. You get a written scope the same day, usually within two to three hours on site.
Dry Ice and HEPA Cleaning
Loose soot comes off first with a HEPA vacuum, then walls, ceilings, and framing get dry ice blasting or chemical sponge treatment. We set negative air machines with charcoal activated filters to keep particles from spreading to clean rooms. This stage runs one to three days depending on square footage.
Odor and Air Treatment
After surfaces are clean, we run a hydroxyl generator or ozone generator (unoccupied only) for 24 to 72 hours. Thermal fogging solution reaches into wall cavities and ductwork where a spray bottle cannot. We re-test before calling the odor job done.
Final Walk and Documentation
You walk the property with the crew lead. We show moisture readings, photograph cleaned surfaces, and hand over the documentation package for your claim. If a section needs structural repair after fire, we flag it in writing before we leave.
Tools & methods
Tools and Methods We Use on Every Job
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Camera
Reads temperature differences behind drywall to find hidden fire damage, charred framing, and hot spots that a visual inspection misses.
Moisture Meter
Maps water from firefighting efforts in subfloor, framing, and wall cavities so drying is measured, not guessed.
HEPA Vacuum
Pulls fine soot and ash off porous surfaces without spreading particles into clean rooms. The first pass on every job.
Negative Air Machine
Creates pressure differentials that keep soot and dust contained to the work zone. Runs with charcoal activated filters.
Hydroxyl Generator
Neutralizes smoke odor in occupied and unoccupied spaces over 24 to 72 hours without the ozone risk.
Ozone Generator
Used in unoccupied spaces for heavy odor loads. We post the space and clear it before anyone re-enters.
Dri-Eaz Drying Equipment
Air movers and dehumidifiers that dry suppression water out of carpet, subfloor, and framing before mold growth after fire suppression water starts.
Use cases
When to Call for Fire Damage Clean Up
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Fire, Ocean View Hills
An electrical fire charred framing and soaked insulation with smoke. The roof deck was open from venting, and rain was forecast. The homeowner had no idea how far the char traveled. → We tarped the roof the same day, removed saturated insulation, cleaned framing with dry ice blasting, and repaired the roof under our C-39 license. Thermal imaging confirmed the char stopped at two studs. The attic tested clean in five days.
Apartment Fire, Beyer Boulevard Corridor
A bedroom fire in a second-floor unit sent smoke into the shared HVAC. The neighboring unit smelled smoke within hours, and the landlord needed documentation for two insurers. → We cleaned the affected unit, checked and cleaned the shared return, and treated both units with a hydroxyl generator. Documentation separated tenant contents from structure. Both units cleared odor tests in three days.
Problems we solve
Fire Damage Problems We Solve in SAN YSIDRO
Most fire calls are not about the flames. They are about what the smoke, the water, and the hidden char do in the weeks after. Here are the problems we get called for most often, and how we handle them.
Smoke odor lingering in walls and HVAC
We clean the air handler and ductwork, run a hydroxyl generator for 24 to 72 hours, and seal affected surfaces with smoke sealant primer. We re-test before we call it done, so you are not guessing.
Hidden fire damage behind drywall
A thermal imaging camera reads temperature differences behind drywall. We open the wall where readings flag, document the char, and quote structural repair after fire in the same scope.
Soot staining on walls and ceilings
We HEPA vacuum loose soot first, then dry ice blast or use chemical sponges. A sealant primer goes on before any paint, which is what stops the stain from bleeding through.
Water damage from firefighting efforts
We extract standing water, set Dri-Eaz air movers and dehumidifiers, and meter every room. Drying is documented with readings your adjuster can use.
Pricing process
What Fire Damage Clean Up Costs
$1,800 - $8,500 depending on scope
Square footage affected
A single bedroom runs far less than a whole house. Soot travel through HVAC can add rooms the fire never touched, which raises the cleaning scope.
Soot severity and type
Grease fire residue is stickier and slower to remove than dry soot from paper or wood. Protein fires from kitchen fires need a different cleaning agent and more time.
Water from suppression
Hundreds of gallons can sit in carpet and subfloor. Extraction and drying add equipment and days to the job, and skipping it invites mold growth after fire suppression water.
How much does fire damage clean up cost in SAN YSIDRO California?
Most residential jobs run $1,800 to $8,500 in 2026, with a small kitchen or bedroom fire at the low end and a whole-house loss with HVAC contamination at the high end. Commercial and multi-unit jobs price higher. Factors include square footage, soot severity, whether ductwork needs cleaning, and how much water the fire department left behind. We give you an itemized scope before work starts, and we bill insurance directly when coverage applies.
Who offers fire cleanup services near me in SAN YSIDRO?
Fire Damage Restoration San Ysidro does, and we answer the phone 24/7 at (833) 929-6186. We are a local crew with a CSLB B-1 license, IICRC FSRT and OCT certified technicians, and four years of fire losses in this area. We cover San Ysidro Center, Los Olivos, Ocean View Hills, and the surrounding neighborhoods. Same-day walk-throughs are standard, not an upsell.
What does fire damage clean up include in SAN YSIDRO California?
It includes board-up, soot and char removal, HEPA vacuuming, dry ice or chemical sponge cleaning of walls and ceilings, HVAC and duct cleaning, odor treatment with a hydroxyl generator or thermal fogging, and water extraction from suppression efforts. We also document everything for your insurance claim. Structural repair after fire, like reframing or drywall replacement, is quoted separately once the cleaning scope is clear.
Can I clean up fire damage myself in SAN YSIDRO?
You can remove loose debris, but soot is acidic and etches surfaces within 72 hours, and the residue keeps off-gassing into drywall and insulation for weeks. A shop-vac without a HEPA filter spreads fine particles through the house and can push smoke odor into rooms that were clean. Hidden fire damage behind drywall and smoke in the HVAC need a thermal imaging camera and negative air machines. For anything beyond a small, contained fire, call a pro.
Ready when you are
Call for Fire Damage Clean Up in SAN YSIDRO, California
Soot etches surfaces within 72 hours, and every hour counts. Call (833) 929-6186 and a licensed crew is dispatched the same day. We answer 24/7, quote by line item, and document everything for your insurer.

Talk with the local team
Request Fire Damage Clean Up
Call (833) 929-6186 any time, day or night. A real person answers, asks about your fire loss, and dispatches a crew. We serve all of SAN YSIDRO, California and typically respond within hours. If you prefer email, reach us at info@firedamagerestorationsanysidro.com and we will reply the same day.



